HBC Abutments
The HBC abutments are designed for use in screw-retained restorations on a single implant.
Note :
- Requires standard implant level impression.
- Use 1.25 mm for insertion and close the abutment screw with 30 Ncm
- LS screws are sold separately from HBC abutments. Use 1.25 mm for insertion and close the abutment screw with 30 Ncm
Download the brochure and see the work flow
3876
Data sheet
- Connection type
- CHC-Connical Narrow Connection
CS - Conical Standard Connection
IH-Internal Hex Connection
EincoBio resorbable synthetic bone substitute filler material
0.200mm - 0.400mm
0.400mm - 0.600mm
1x1.0 cc of 0.5g
the current 3+1 offer:
For 3 products of the same EincoBio reference purchased, 1 product of the same...
Full guided surgery kit for Internal Hex (IH), Conical Standard (CS) and Conical Narrow Connections (CHC)
Kit contents support the entire guided surgery procedure from site preparation to final implantation.
Ti Base - Engaged (Single tooth)
Titanium Bases used as abutments for digital restorations at implant level with Alpha-Bio Tec original implant connection.
Long Open Tray Transfer - CS (Conical Standard Connection)
T-Gen Collagen Membrane (15x20mm)
Leave a review